Siemens Mobility Limited
Sopers Lane, Poole, Dorset
BH17 7ER
Version
11
Page 36 of 117
Status
Issued
Last Editor
Jeerh, Manpreet
Date
March 2020
Document
Name
WIMAG GENERAL HANDBOOK
Doc. No.
667/HB/47200/000
Copyright
©
Siemens Mobility Limited 2012. All Rights Reserved.
5.3 PoE Port Indications
The two PoE Ethernet ports provide both the communications and power to
connected Access points. In order to assist with installations and diagnostics, the
two small LEDs, on the port, have the following descriptions;
E
th
er
ne
t 2
P
O
E
Figure 24 : PoE Port Indicators
Top LED (Yellow)
•
LED Off : PoE supply is not active.
•
LED On : PoE supply and attached device active*.
Bottom LED (Green)
•
LED Off : Ethernet link is not active.
•
LED On : Ethernet activity
5.4 Service Port Indications
The service Ethernet Ports provides a port suitable for laptop connections or for
onwards Ethernet linking (reference sections 7 and 14 for further details). In order to
assist with installations and diagnostics, the two small LEDs, on the port, have the
following descriptions;
E
th
er
ne
t 2
P
O
E
Figure 25 : Service Ethernet Port Indicators
Top LED (Yellow)
•
LED Off : No Ethernet activity
•
LED On : Ethernet activity.
Bottom LED (Green)
•
LED Off
– Green : No Ethernet device attached
•
LED On
– Green : Ethernet device attached
5.5 Serial Interface Port
The Serial Interface Port is for Engineering diagnostic use only.
