Siemens Mobility Limited
Sopers Lane, Poole, Dorset
BH17 7ER
Version
11
Page 50 of 117
Status
Issued
Last Editor
Jeerh, Manpreet
Date
March 2020
Document
Name
WIMAG GENERAL HANDBOOK
Doc. No.
667/HB/47200/000
Copyright
©
Siemens Mobility Limited 2012. All Rights Reserved.
7.3.3 Bicycle Sensor Configuration
The bicycle sensor configuration provides for a multitude of settings. This section, in
combination with Appendix B, provides the recommended set up for this detector type.
The bicycle sensor is generally able to differentiate between bicycles and other vehicles.
The Traffic Dot interface will also allow for the two detections types to be routed to
differing outputs on a WiMag card. For details on how to configure the settings please
refer to Section 7.3.7, for Siemens specific settings, in combination with the Traffic Dot
Set Up and Operating Guide (P/N 152-240-001-071).
In general the recommended settings for bicycle detection and count are:
•
Sample Rate
– 4Hz
•
Detection Distance
- 6 Ft
•
Auto baseline - 5 m
in
•
Auto baseline Sensitivity
– 4 (below example shown as 2)
Figure 35 : Advanced Settings
