Operating Instructions
Chapter 6
ICR845-2
Startup and configuration
8012377/0000/2008-01-30
©
SICK AG · Division Auto Ident · Germany · All rights reserved
89
6.10
ICR845-2 messages
The ICR845-2 outputs encoded system and error messages via the auxiliary interface to re-
port user actions or events in the reading process. When the system is started, the ICR845-
2 also outputs system messages in plain text (English). If configured accordingly, the
ICR845-2 transfers the error status ST in the data output string of the host interface.
6.10.1
Displaying messages
In the 4th field from the left in the status bar at the bottom of the screen, CLV-Setup displays
system and error messages that occur at the terminal interface of the ICR845-2. These are
recorded in a file, which is continuously updated. The messages have the following format:
System message: "ICR SYS-Message: xxx"
Error message:"ICR SYS-Error: 048ID8xxx"
The additional system messages in plain text can be displayed in the terminal emulator if
CLV-Setup and the terminal emulator are started before the ICR845-2 is connected.
Additional system messages:
When the system is started, these system messages inform the user whether the starting
process was successful. To do this, the ICR845-2 must be connected to CLV-Setup via the
serial auxiliary interface (RS 232) and the Terminal Emulator must be opened before star-
ting the device. No further measures are normally required.
Fig. 6-28
shows an example.
Chapter 8.3 Error messages, Page 106
explains the meaning of the messages.
Fig. 6-28:
CLV-Setup: Displaying the system messages in the Terminal Emulator when starting the
ICR845-2
