Operating Instructions
Chapter 2
ICR845-2
Safety Information
8012377/0000/2008-01-30
©
SICK AG · Division Auto Ident · Germany · All rights reserved
11
The product is classified in LED class 1 in accordance with EN 60825-1 and IEC 60825-1
(for publication date, see the warning sign on the device).
Important
Maintenance is not required to ensure compliance with LED class 1.
Warning labels
At the ICR845-2, the warning label (
Fig. 2-2
) in three languages and the warning symbol are
located on the wide side of the housing.
If the ICR845-2 is installed in a machine/panel with the result that the warning labels are
no longer visible, additional warnings (not included in the scope of delivery) must be pro-
vided on the machine beside the emergence aperture of the LED radiation.
Controlling the illumination LEDs
Activation and deactivation of the LEDs when reading is controlled by the reading pulse
(trigger source).
A timer (illumination timeout) automatically deactivates the LEDs 10 minutes (default
setting) after a continuous reading pulse is initiated in Reading mode with switching in-
put pulse modes "Sensor Input" and "Serial Interface". However, it does not end the
Fig. 2-1:
Outlet opening of the LED radiation at the ICR845-2
Outlet opening
(entire window area)
Fig. 2-2:
Black-yellow signed warning labels found on the ICR845-2
