Chapter 10
Operating Instructions
ICR845-2 Image Code Reader
156
©
SICK AG · Division Auto Ident · Germany · All rights reserved
8012377/ 0000/ 2008-01-30
Appendix
The ICR845-2 compares now every code it reads with match code 1. In doing so, it out-
puts the result of the comparison via the "Result 2" output and "Result" LED with the
predefined pulse length.
If teach-in of match code 1 has not been sucessfully, the ICR845-2 will either use the
last saved match code 1 or will not compare any code (depends on the settings above).
10. Keep the switch closed.
The ICR845-2 will activate teach-in mode again if you open the switch!
Replacing the match code:
To replace the current match code 1 with a new match code using the teach-in method, sim-
ply repeat Steps 5 to 9.
Checking the taught-in match code in the ICR845-2:
1.
Perform an upload from the ICR845-2.
To do so, click on
in the toolbar.
2.
Click the M
ATCH
C
ODE
P
ARAMETERS
button on the D
EVICE
C
ONFIGURATION
tab.
The M
ATCH
C
ODE
P
ARAMETERS
tab is opened and shows the bar code type in the T
YPE OF
M
ATCH
C
ODE
section and the data content of match code 1 in the M
ATCH
C
ODE
section.
