manualshive.com logo in svg

SICK ICR845-2, Operating Instructions Manual

Share
Download
SICK ICR845-2 Operating Instructions Manual Download Page 87

Operating Instructions 

Chapter 6

ICR845-2

Startup and configuration

8012377/0000/2008-01-30

©

 SICK AG · Division Auto Ident · Germany · All rights reserved

87

s

3.

To return to Reading mode, click the R

EADING

 M

ODE

 radio button or close the Terminal 

Emulator.
The ICR845-2 returns to Reading mode.

The code number "1500" means that the self-test was completed successfully and that no 
faults were diagnosed.

Chapter 8.3 Error messages, Page 106

 lists the error key together with the associated cor-

rective measures.

6.9.8

Code statistics for RDT400

Function of the auxiliary interface. In this mode, the ICR845-2 outputs a data string with sta-
tistic information on the reading situation. 

For detailed description of the functions and applications of the Remote Diagnostic Tool 
RDT400 see the RDT400 Operating Instructions (no. 8009385, English).

"Code statistics for RDT400" is activated via the A

UXILIARY

 I

NTERFACE

 tab.

1.

Select the C

ODE STATISTICS FOR

 RDT400 option on the A

UXILIARY

 I

NTERFACE

 tab.

2.

Perform a download to the ICR845-2. 
To do so, click the listing field again with the right mouse button and choose D

OWNLOAD 

P

ARAMETER

 in the context menu.

CLV-Setup copies the parameter temporary to the ICR845-2.
The auxiliary interface then operates in "Code statistics for RDT400" mode until the 
ICR845-2 is switched off again.

Fig. 6-26: 

CLV-Setup: Displaying the self-test result in the Terminal Emulator

Summary of Contents for ICR845-2





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands