Operating Instructions
Chapter 10
ICR845-2
Appendix
8012377/0000/2008-01-30
©
SICK AG · Division Auto Ident · Germany · All rights reserved
177
System messages
Messages in plain text used to output the operating status of the ICR845-2. The messag-
es are output via the auxiliary interface only. The messages can be displayed in the Terminal
Emulator of the CLV-Setup configuration software if requested by the user.
Teach-in
Method of programming the information required to adjust the ICR845-2 to the reading ap-
plication in Parameter mode. Example: Teach-in of match code 1
Terminator
Data block in the reading result of the host interface. Used to terminate the data content
of the code. Contains up to 10 elements, consisting of reading diagnosis data and/or con-
stants (control characters, letters, digits), depending on the configuration. The "Terminator"
block is empty in the default setting of the ICR845-2.
Upload
Method of transferring the parameter set from the ICR845-2 to the PC using the CLV-
Setup configuration software. CLV-Setup either transfers a complete copy of the current pa-
rameter set from the memory (RAM) of the ICR845-2 (U
PLOAD FROM DEVICE
) or just the param-
eter previously processed using the context menu of the right mouse button
(U
PLOAD
P
ARAMETER
) or all parameters of the displayed tab (U
PLOAD
P
ARAMETERS OF THIS
V
IEW
).
Displays the current parameter values on the tabs. Prerequisite for modifying the current
parameter set
User interface
Windows-based input interface of the CLV-Setup configuration software used for operating
and configuring the ICR845-2.
