DE6329
1
RDR-PXT (USB)
Reader For Proximity Key Enrollment
Installation Instructions
1. INTRODUCTION
The RDR-PXT is a proximity reader designed for batch
enrollment of proximity keys in the PC. It allows easy
inclusion of non-contact ID key reading into AXSalert
software. The reader transmits the key data 4 times
(every 100 ms) when key is presented to reader. Key
data is accompanied by checksum error detection code
for higher reliability. The RDR-PXT connects to the PC
using a USB port.
2. TECHNICAL SPECIFICATIONS
Technology:
RF/ID (Passive RF transponder)
Frequency:
125 kHz
ID codes:
10
12
unique combinations (1 trillion)
Read range:
40-60 mm (2 - 3 in.)
Reading time:
100 ms
Size (H x W x H):
115 x 73 x 29 mm (4-1/5 x 2-7/8 x 1-1/8 in)
Weight:
120 gr (4.2 oz)
Cable length:
1.5 m (5 ft)
Connector:
USB
Interface to host:
USB
Current drain:
30mA
Temperature range:
0
°
C - 50
°
C (32
°
F - 130
°
F) - indoor use only
3 . INSTALL THE SOFTWARE
Insert the AXSalert CD in to the CD-ROM drive; wait a few seconds. The installation setup will start automatically.
If the setup does npot start automatically, click
Start
and select
Run.
In the field that appears, enter
D:\Install.exe
(where D is the letter of your CR-ROM drive).
Follow the instructions that appear on the PC screen.
After installation is completed, connect the RDR-PXT to a USB port on your computer.
3. START THE SOFTWARE
Double click on the AXSalert icon on the desktop
A prompt will appear to insert username and password. Type "admin" (password is not needed) in the user name
field and click on "Login" button.
Attention: Do not connect the RDR-PXT before installing the software