manualshive.com logo in svg

SICK ICR845-2, Operating Instructions Manual

Share
Download
SICK ICR845-2 Operating Instructions Manual Download Page 137

Operating Instructions 

Chapter 10

ICR845-2

Appendix

8012377/0000/2008-01-30

©

 SICK AG · Division Auto Ident · Germany · All rights reserved

137

on your hard disk.

– or –

Select the option to save the software locally on your local hard disk and confirm with 
OK. 
In the F

ILE DOWNLOAD

 dialog box select the desired target directory on your hard disk.

The "CLVSetupxx.exe" file is then saved at this location (xx = version number).
Select O

PEN

 in the dialog box to start the file.

8.

The installation program starts and guides you through the installation with screen 
messages. The program asks you for your user name and company name. This informa-
tion appears as a header in printouts. "CLV-Setup" and CLV Assistant are installed. The 
software will be entried in the Windows start menu under "Programs\CLV-Setup".

9.

Please read the Readme file, as it contains the latest information and problems regard-
ing CLV-Setup.

10. Then confirm the final installation message by clicking "OK".

Online help CLV-Setup Help:

1.

Return to the start page of the CD-ROM with the opened folder "Software".

2.

Select CLV, CLV H

ELP

 S

OFTWARE

 in the listing.

A table with CLV Help information is displayed.

3.

Select D

OWNLOAD

 under S

OFTWARE FILE

.

4.

In the F

ILE DOWNLOAD

 dialog box select the option to install directly from the CD-ROM. 

Confirm with OK. The software is automatically saved in the "Programs\CLV" directory 
on your hard disk

– or –

Select the option to save the software locally on your local hard disk and confirm with 
OK.
In the F

ILE DOWNLOAD

 dialog box select the same target directory as selected for CLV-Set-

up on your hard disk.
The "CLVHelp.exe" file is then saved at this location.

5.

After downloading the software, select O

PEN

 in the dialog box to start the software.

The software is installed in the sub directory "Help" of the main directory "CLV". 
CLV Help will also be entried in the Windows start menu under "Programs\CLV-Setup".

Restart the PC.
Some Windows DLL files are possibly updated.

The "CLV-Setup" program, the CLV Assistant and the online "CLV-Setup Help" are installed 
and ready.

The program logs all of the files that are installed to the "install.log" file. This list is used by 
the uninstaller to remove CLV-Setup and must not be deleted if you want to use the unin-
staller at some time in the future.

Summary of Contents for ICR845-2





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands