Operating Instructions
Chapter 2
ICR845-2
Safety Information
8012377/0000/2008-01-30
©
SICK AG · Division Auto Ident · Germany · All rights reserved
9
2
Safety Information
This chapter deals with your safety and operator safety in the opertional area.
Read this chapter carefully before using the ICR845-2.
2.1
Authorized users
For correct and safe functioning, the ICR845-2 must be installed, operated and maintained
by sufficiently qualified staff.
Repairs to the ICR845-2 should only be carried out by qualified and authorised SICK AG
service staff.
Supplied the end user with the operating instructions.
Provide the end user with expert tuition and advise him to read the operating instruc-
tions.
The following qualifications are required for the various tasks involved:
2.2
Intended use
The ICR845-2 is an intelligent sensor for the automatic reading and decoding of 1D codes
(bar codes) and 2D codes on objects in a reading station. The sensor is optimised to appli-
cations in which the codes are read either on objects transported with high velocity or on
not moved objects.
The ICR845-2 transfers the reading data via its host interface (serial RS 232/422/485 or
Ethernet) to a host computer for further processing.
The ICR845-2 is configured/operated using the CLV-Setup configuration software that runs
on a standard client PC (Windows
TM
) provided by the customer.
Important
Any warranty claims against SICK AG shall be deemed invalid in the case changes to the
device, such as opening the housing, this includes modifications during installation and
electrical installation or changes to the SICK software.
The ICR845-2 is only to be operated in the permitted ambient air temperature range.
Tasks
Qualifications
Installation, maintenance
– General technical training
– Knowledge of the standard guidelines relating to safety in the work-
place
Electrical installation,
replacement
– Practical electrical training
– Knowledge of the common electrical safety guidelines
– Knowledge regarding the operation of the devices in the relevant ap-
plication (e.g. conveyor belt)
Startup, configuration
– Basis knowledge of the Windows
TM
operating system
– Basis knowledge of designing and setting up (adressing) Ethernet
connections for connecting the ICR845-2 to the Ethernet
– Basis knowledge of working with an HTML browser (e.g. Internet
Explorer
TM
) for using the online help
– Basic knowledge of data transfer
– Basic knowledge of 1D/ 2D code technology
Operation of the devices in
each operational area
– Knowledge regarding the operation of the devices in the relevant
application (e.g. conveyor belt)
– Knowledge of the hardware and software environment of the rele-
vant application (e.g. conveyor belt)
Tab. 2-1: Required qualifications for starting up the ICR845-2
