146
Appendix 5 Optional equipment
Optional equipment
Terminal
type
Terminal
name
Function
name
Remarks and function description
Analog
signal
output
AMI
---
Connected with an external analog meter to indicate the
output frequency or current.
P5S
P5S
5V Source
5
5
5V Ground
(6). Profibus communication expansion board (SE2-PD01)
1). SE2-PD01
meets EN50170 standards, using profidrive DPV0 standards.
2). SE2-PD01 as a slave for Profibus network, the maximum rate of communication to support
12M.
3). SE2-PD01 using a common terminal form to connect profibus network, addresses is from 1
to 125.
4). Connect SE2-PD01, please use the unshielded twisted pair RS-485 cable (recommended
PROFIBUS approved cable)
.
5). SE2-PD01 power is supplied by the inverter which connected to it.
Terminal type
Terminal
name
Function
name
Remarks and function description
Profibus
communication
terminal
FG
SHIELD
Shield ground
D-
RxD/TxD- N
Profibus Data -
D+
RxD/TxD- P Profibus Data +
CNTR
RTS
Profibus request signal
V-
Data
reference
potential (C)
5V Ground and reference Ground for data
V+
+5V
5V Source
SP LED: Instructed the inverter and SE2-PD01 connection status.
NET LED: Instructed SE2-PD01 and the Profibus DP network connection status.
Note: The shihlin inverter can automatically identify the SE2-PD01 communications expansion board, and adjust
the corresponding parameters of its own with the SE2-PD01 to make a successful connection, the user in the
course of communication do not modify the drive parameters, so as not to affect the SE2-PD01 normal work