Sharp EL-9650 Operation Manual Download Page 27

Page: 27 / 373

GENERAL INFORMATION

3. Press

≥≥≥≥

(or press

or select [5 int] with the touch-pen).

4. Press

, or select [5 int] with the touch-pen

again.

The “int” indication appears on the screen that was

displayed before the menu screen appeared.

is not necessary when pressing

of procedure

* In this calculator, functions are grouped and stored in menus. This allows the many functions

to be used easily.

1. Press

≥

to open the MATH menu.

2. Press

(or select [B NUM] using

≥

or the

touch-pen).

<Example>

To use the “int” function to obtain a whole number (The “int” function is in the [B NUM]

sub-menu of the MATH menu.)

EL-9650-(01)En (001-036)

8/1/00, 12:04 PM

Summary of Contents for EL-9650






















































































































































































































































































































































































Search results

Summary of Contents for EL-9650

Reviews:

Sharp EL-9650, Operation Manual, Page: 27 / 373

Search results

Summary of Contents for EL-9650

Reviews: