Home
/
Sharp
/
EL-9650
/
Operation Manual

Sharp EL-9650, Operation Manual, Page: 122 / 373

Share

Page: 122 / 373

Sharp EL-9650 Operation Manual Download Page 122

112

CHAPTER 4

Shows that a point exists at the location (column
No. 10, row No. 20).

Shows that a point does not exist at the location
(column No. 10, row No. 21).

[1 Pnt ON]

Draws a point on the specified graph screen.

[2 Pnt OFF]

Deletes a point on the specified graph screen. (Points (dots) making

up the graph or coordinate axis can also be deleted.)

[3 Pnt CHG]

Changes the display status of a point on the specified graph screen.

(Deletes the point when it is displayed and draws the point when it is

not displayed.)

*

For Pnt ON, Pnt OFF and Pnt CHG, input by specifying coordinates of the X and Y axis.
For example, Pnt ON (5,3) defines points at coordinates X = 5, Y = 3

[4 Pxl ON]

Draws a point at a specified location by inputting the column and row.

Column and row definitions are shown to the right.

Column: 0 to 126 (For the split screen (see CHAPTER 4 “15. Useful

Functions” on page 124), only a range of 0 to 64 can be specified.)

Row: 0 to 62

This area cannot be specified.

[5 Pxl OFF]

Deletes a point at a location specified by column and row. (Points

(dots) making up the graph or coordinate axis can also be deleted.)

[6 Pxl CHG]

Changes the display status of a point at a location specified by

column and row. (Deletes the point when it is displayed and draws

the point when it is not displayed.)

[7 Pxl TST]

Displays “1” when a point exists at a location specified by column and

row and “0” when no point exists.

Row

Column

(0,0)

(0,62)

(126,0)

(126,62)

132

64

The following screen will appear.

←

←

EL-9650-(04)En (079-134)

8/7/00, 9:08 PM

112

«
...
120
121
122
123
124
...
»

Summary of Contents for EL-9650






















































































































































































































































































































































































Reviews:

No comments