manualshive.com logo in svg

Sharp EL-9650, Operation Manual, Page: 228 / 373

Share
Download
Sharp EL-9650 Operation Manual Download Page 228

218

CHAPTER 9

4. Press 

®

 to register the equation.

• A maximum of 99 equations can be registered.

• The number of equations which may be registered varies depending on how much

memory is currently free.

4. Calling Up the Solver Equation

• To call up the registered solver equation, follow these steps.

1. Press 

Ï

 

 to enter the solver mode.

2. Press 

Ï

 

 again to display the solver menu.

3. Press 

B

.

The equation number and its name will appear on the screen.

4. Press 

01

 

®

. (Input the equation number

to call a desired solver equation.)

• After the equation has been called, enter values for

known variables and move the cursor to the variable

for which you wish to find the solution, and solve.

EL-9650-(09)EN (211-220)

8/1/00, 9:14 AM

218

Summary of Contents for EL-9650






















































































































































































































































































































































































Reviews:

No comments