manualshive.com logo in svg

Sharp EL-9650, Operation Manual, Page: 249 / 373

Share
Download
Sharp EL-9650 Operation Manual Download Page 249

239

PROGRAMMING FUNCTION

• The calculator is equipped with a PROGRAM function.

• Programming makes the automatic processing of both simple and complex

calculations possible any number of times.

• In addition to special functions, almost all ordinary functions can be used in programming.

• Complex numbers cannot be used in programming.

1. Creating a New Program

• The following is the procedure used to create a new program.

1. Press 

Ï

 

 to display the programming menu

shown to the right.

*

The titles of any existing programs are displayed on the right
side of the screen.

[A  EXEC] - The program execution menu

[B  EDIT] - The program edit menu

[C  NEW] - The new program menu

2. Press 

C

 

®

 to select the new program menu.

A program title input screen like that shown to the

right will be displayed.

First, input the title. (Titles can be up to 8 digits in

length, and can include both letters and numerals.)

3. Input the program title (ex. ABC), then press 

®

.

4. The cursor pointer will move past the line under the

program title and downward to the program input

screen.

5. Input the program.

In addition to standard functions, special program-

ming functions from the programming function menu

can also be used by pressing  

Ï

 

 again while

in the programming mode.

CHAPTER 12

PROGRAMMING FUNCTION

EL-9650-(12)En (239-258)

8/1/00, 9:31 AM

239

Summary of Contents for EL-9650






















































































































































































































































































































































































Reviews:

No comments