manualshive.com logo in svg

Sharp AR-BC260, Operation Manual, Page: 111 / 184

Share
Download
Sharp AR-BC260 Operation Manual Download Page 111

COLOR ADJUSTMENTS MENU

6-15

6

Brightness

This copier allows the level of brightness of images to be adjusted.

1

Touch the [BRIGHTNESS] key on the
COLOR ADJUSTMENTS menu screen.

The BRIGHTNESS
setting screen will
appear.

2

Adjust the brightness.

Use the [-] and [+] keys to adjust the level of the
BRIGHTNESS.

When the key is touched, the color adjustments
menu icon (

) will appear at the upper left of the

screen to indicate that the function is turned on.

3

Touch the [OK] key (inside [OK] key) on
the BRIGHTNESS setting screen.

Return to the COLOR ADJUSTMENTS menu
screen.

4

Touch the [OK] key on the COLOR
ADJUSTMENTS menu screen.

Return to the SPECIAL MODES screen.

5

Touch the [OK] key on the SPECIAL
MODES screen.

Return to the main screen of copy mode.

Intensity

This copier allows the level of intensity of images to be adjusted.
This function can only be used when the original is placed on the document glass. (The reversing single pass feeder
cannot be used.)

1

Touch the [INTENSITY] key on the COLOR
ADJUSTMENTS menu screen.

The INTENSITY setting
screen will appear. 

2

Adjust the intensity.

Use the [-] and [+] keys to adjust the level of the
INTENSITY.

When the key is touched, the color adjustments
menu icon (

) will appear at the upper left of the

screen to indicate that the function is turned on.

3

Touch the [OK] key (inside [OK] key) on
the INTENSITY setting screen.

Return to the COLOR ADJUSTMENTS menu
screen.

4

Touch the [OK] key on the COLOR
ADJUSTMENTS menu screen.

Return to the SPECIAL MODES screen.

5

Touch the [OK] key on the SPECIAL
MODES screen.

Return to the main screen of copy mode.

T

SHARPNESS

BRIGHTNESS

IN

SU

BAC

OK

CANCEL

OK

COLOR 
ADJUSTMENTS

BRIGHTNESS

-2

2

0

About the steps that follow

If the reversing single pass feeder is being
used, see pages 5-2 through 5-6. If the
document glass is being used, see pages 5-7
through 5-9.
In either case, press the [COLOR COPY
START] key to begin copying.

To cancel the BRIGHTNESS function, select the
BRIGHTNESS function again and touch the
[CANCEL] key (step2).

SS

ESS

SUPPRESS 

BACKGROUND

INTENSITY

OK

CANCEL

OK

COLOR 
ADJUSTMENTS

INTENSITY

-2

2

0

About the steps that follow

See pages 5-7 through 5-9, press the [COLOR
COPY START] key to begin copying.

To cancel the INTENSITY function, select the
INTENSITY function again and touch the [CANCEL]
key (step 2).

ApollonII_general-copy_SEC.book  15 

ページ

  

２００４年９月６日　月曜日　午後４時５７分

Summary of Contents for AR-BC260

























































































































































































Reviews:

No comments