manualshive.com logo in svg

Sharp AR-BC260, Operation Manual, Page: 153 / 184

Share
Download
Sharp AR-BC260 Operation Manual Download Page 153

INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)

11

11

Follow the on-screen instructions to
install the printer driver.

If a warning message regarding the Windows logo
test appears while the printer driver files are being
copied (the warning message may appear several
times), be sure to click the [Continue Anyway]
button.

12

When the finish setup window appears,
click the [OK] button.

13

When the finish installation window
appears, click the [Close] button.

When the message "Now connect the interface
cable to the PC. This will finalize the driver's
installation and settings." appears, click the [OK]
button.

14

Connect the machine to your computer an
interface cable (page 18).

●

If you are using a USB cable, make sure the
machine power is turned on and then connect
the cable.

●

If you are using a parallel cable, turn off both the
machine power and the computer power and
then connect the cable. Turn the machine power
on first and then turn on your computer. 
The machine is found and a plug and play
window appears.

15

Installation of the printer driver begins.

The printer name will appear in the "Found New
Hardware Wizard". Select "Install the software
automatically (Recommended)" and click the
[Next] button. Follow the on-screen instructions to
install the printer driver.

This completes the installation.

NOTES

A message prompting you to restart your computer
may appear after installation is finished. If this
message appears, click [Yes] to restart your
computer.

apollonII_inst_sec.book  11 

ページ

  

２００４年９月１０日　金曜日　午前８時５２分

Summary of Contents for AR-BC260

























































































































































































Reviews:

No comments