manualshive.com logo in svg

Sharp AR-BC260, Operation Manual, Page: 143 / 184

Share
Download
Sharp AR-BC260 Operation Manual Download Page 143

1

INTRODUCTION

Thank you for purchasing this product. This manual explains how to install the printer driver and utilities required for
the printer function. To use the printer function, please read the following manuals. 

Installation guide (for printer) (this manual)

Explains the contents of the CD-ROM that is included with the product and the procedure for installing the
software.

Manuals for use of the printer function

●

●

●

●

Operation manual (for printer)

This manual can be found in the "Software CD-ROM".
This contains information on using the printer function, including printer settings, how to print, printing from the
operation panel of the machine, troubleshooting, and key operator programs for the printer function.

Help files installed with the software in the "Software CD-ROM"

●

●

●

●

Printer Status Monitor Help file

●

●

●

●

Printer Administration Utility Help file

Print Server Card Online Manual

●

●

●

●

Print Server Card Online Manual

This manual is on the "Software CD-ROM". Refer to this manual when using the machine in a network
environment.

SOFTWARE LICENSE

The SOFTWARE LICENSE will appear when you install the software from the CD-ROM. By using all or any
portion of the software on the CD-ROM or in the machine, you are agreeing to be bound by the terms of the
SOFTWARE LICENSE.

Manuals for use of the network scanner function

●

●

●

●

Operation manual (for network scanner)

This manual can be found in the "Software CD-ROM".
Read this manual for information on using Scan to FTP, Scan to E-mail, and other network scanner functions.
To use the scanner function, the network scanner expansion kit (AR-NS2) is required. For more information,
see page 1 of the OPERATION MANUAL (for network scanner).

apollonII_inst_sec.book  1 

ページ

  

２００４年９月１０日　金曜日　午前８時５２分

Summary of Contents for AR-BC260

























































































































































































Reviews:

No comments