manualshive.com logo in svg

Sharp AR-BC260, Operation Manual, Page: 142 / 184

Share
Download
Sharp AR-BC260 Operation Manual Download Page 142

WARNING:

FCC Regulations state that any unauthorized changes or modifications to this equipment not
expressly approved by the manufacturer could void the user's authority to operate this equipment.

Note:

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the operation manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.

Warranty

While every effort has been made to make this document as accurate and helpful as possible, SHARP Corporation
makes no warranty of any kind with regard to its content. All information included herein is subject to change without
notice. SHARP is not responsible for any loss or damages, direct or indirect, arising from or related to the use of this
operation manual. 

© Copyright SHARP Corporation 2004. All rights reserved. Reproduction, adaptation or translation without prior
written permission is prohibited, except as allowed under copyright laws.

Trademark Acknowledgments 

Sharpdesk is a trademark of Sharp Corporation.

Microsoft

®

, Windows

®

, Windows

®

 95, Windows

®

 98, Windows

®

 Me, Windows NT

®

 4.0, Windows

®

 2000, Windows

®

XP, Windows

®

 Server 2003 and Internet Explorer

®

 are registered trademarks or trademarks of Microsoft Corporation

in the U.S.A. and other countries.

Netscape Navigator is a trademark of Netscape Communications Corporation.

Macintosh, Power Macintosh, Mac OS, LaserWriter, and AppleTalk are registered trademarks of Apple Computer,
Inc.

IBM, PC/AT, and PowerPC are trademarks of International Business Machines Corporation.

Pentium is a registered trademark of Intel Corporation.

PCL is a trademark of the Hewlett-Packard Company.

PostScript

®

 is a registered trademark of Adobe Systems Incorporated.

Acrobat

®

 Reader Copyright © 1987-2002 Adobe Systems Incorporated. All rights reserved.

Adobe, the Adobe logo, Acrobat and the Acrobat logo are trademarks of Adobe Systems Incorporated.

NetWare is a registered trademark of Novell, Inc.

Agfa and the Agfa Rhombus, are registered trademarks of Agfa-Gevaert, A.G. All other product names are the
property of the respective owners.

All other trademarks and copyrights are the property of their respective owners.

The display screens, messages, and key names shown in the manual may differ from those on the actual machine
due to product improvements and modifications.

apollonII_inst_sec.book  1 

ページ

  

２００４年９月１０日　金曜日　午前８時５２分

Summary of Contents for AR-BC260

























































































































































































Reviews:

No comments