manualshive.com logo in svg

Sharp AR-BC260, Operation Manual, Page: 71 / 184

Share
Download
Sharp AR-BC260 Operation Manual Download Page 71

PART NAMES AND FUNCTIONS (The Reversing Single Pass Feeder)

4-3

4

Operation Panel

Touch panel (Details are on the next page 4-4)

Messages and touch keys are displayed here.
Selections are made by touching the displayed
keys. Selections made with the keys are confirmed
by a "beep"* that is sounded when a key is touched,
and highlighting of the selection key.
* If a key that cannot be selected is touched, double-

beep will sound.

Keys that are grayed out cannot be selected.

Mode select keys

Use to change modes and the corresponding
display on the touch panel.

[COPY] key

Press to select the copy mode and display the main
screen of the copy mode. (next page 4-4)
If this key is pressed and held while the main
screen of the copy mode is displayed, the total
output count will be displayed.

Numeric keys

Use to select the number of copies and to make
numerical entries for setting operations.

[C] key (clear key)

Press to clear a copy quantity entry. If this key is
pressed while the reversing single pass feeder is
being used, any originals in progress will be
automatically output.

[CA] key (clear all key)

This returns all copy mode settings to the default
settings. However, the touch panel display mode
will not be changed.
When beginning a copy job, press this key.

[ ] key ([ACC.#-C] key)

If the auditing mode has been set, press this key to
close an open account after finishing a copy job.
For setting of the auditing mode, see page 1-11.

[#/P] key (page 6-25)

Press to select the job memory mode.

[START] key

When the indicator is lit, a copying job can be
started. Press to start copying.

●

[COLOR COPY START (

)] key

Press this key to start a single or multiple color
copy job.

●

[BLACK COPY START (

)] key

Press this key to start a black and white copy
job.

ApollonII_general-copy_SEC.book  3 

ページ

  

２００４年９月６日　月曜日　午後４時５７分

Summary of Contents for AR-BC260

























































































































































































Reviews:

No comments