manualshive.com logo in svg

Sharp AR-BC260, Operation Manual, Page: 165 / 184

Share
Download
Sharp AR-BC260 Operation Manual Download Page 165

MODEL

AR-BC260

•

PURPOSE OF THE KEY 

   OPERATOR PROGRAMS

•

KEY OPERATOR 
PROGRAM LIST

•

USING THE KEY 

   OPERATOR PROGRAMS

•

GENERAL PROGRAMS

•

PROGRAMS FOR COPY 
MODE

1

2

3
6

14

DIGITAL FULL COLOR  MULTIFUNCTIONAL 
SYSTEM

Page

KEY OPERATOR'S GUIDE

Be sure to become thoroughly familiar with this manual to gain 
the maximum benefit from the product.

Before installing this product, be sure to read the installation 
requirements and cautions sections of the "Operation manual 
(for general information and copier operation)".

Be sure to keep all operation manuals handy for reference 
including this manual, the "Operation manual (for general 
information and copier operation)" and operation manuals for any 
optional equipment which has been installed.

This manual describes programs for use by the key operator. The 
key operator should read this manual thoroughly to gain the 
maximum value that these programs provide.

CHINA

KS1

930FCZZ

Apollon2_key_cover_sec.fm  1 

ページ

  

２００４年９月２日　木曜日　午後２時５１分

Summary of Contents for AR-BC260

























































































































































































Reviews:

No comments