Sharp AR-BC260, Operation Manual, Page: 108 / 184

COLOR ADJUSTMENTS MENU
6-12
RGB adjust
Strengthens or weakens one of three primary colors, red (R), green (G), or blue (B).
1 Touch the [RGB ADJUST] key on the
COLOR ADJUSTMENTS menu screen.
2 Select a color from R (RED), G (GREEN),
and B (BLUE).
Only one primary color can be adjusted.
3 Adjust the selected color.
Touch the [+] to
strengthen the selected
color or touch the [-] key
to weaken the color.
When the key is touched, the color adjustments
menu icon (
) will appear at the upper left of the
screen to indicate that the function is turned on.
4 Touch the [OK] key (inside [OK] key) on
the RGB ADJUST setting screen.
Return to the COLOR ADJUSTMENTS menu
screen.
5 Touch the [OK] key on the COLOR
ADJUSTMENTS menu screen.
Return to the SPECIAL MODES screen.
6 Touch the [OK] key on the SPECIAL
MODES screen.
Return to the main screen of copy mode.
OLOR ADJUSTMENTS
RGB ADJUST SH
COLOR
BALANCE
BR
RGB ADJUST
OK
COLOR
ADJUSTMENTS
ONLY ONE COLOR CAN BE ADJUSTED.
R(RED) G(GREEN) B(BLUE)
OK CANCEL
-2 -1 0 1 2
OK CANCEL
-2 -1 0 1 2
About the steps that follow
If the reversing single pass feeder is being
used, see pages 5-2 through 5-6. If the
document glass is being used, see pages 5-7
through 5-9.
In either case, press the [COLOR COPY
START] key to begin copying.
To cancel the RGB ADJUST function, select the
RGB ADJUST function again and touch the
[CANCEL] key (step 2 or 3).
sec_apollon_06-1.fm 12 ページ ２００４年１１月１５日 月曜日 午前１１時４５分