Basic sensor cable installation
5 - 6 • • • Intelli-FLEX II product guide
Service loops
•
Install a U-shaped service loop approximately every 15 m (50 ft.) along the
sensor cable run. The loop should measure approximately 30 to 45 cm (12 to
18 in.) from top to bottom. The recommended location for service loops is at
fence posts. Fence posts are typically 3 m (10 ft.) apart.
Pointers
Keep the following in mind when handling the sensor cables:
•
Handle the cable carefully. Sensor cable MUST not be jerked, stretched,
knotted, kinked, nicked, or scraped.
Figure 5-7 Single cable pass
Figure 5-8 Double cable pass
sensor cable installed at ½ fence height
service loop
(use for cable repair)
12 to 18 in.
(30 to 45 cm)
double pass of sensor cable
service loop
(use for cable repair)
12 to 18 in.
(30 to 45 cm)
1/3 fence height
1/3 fence height
1/3 fence height
