manualshive.com logo in svg

Seepex BN 5-12 Series, Operation & Maintenance Manual

The Seepex BN 5-12 Series is a versatile and efficient pump system designed for various applications. Ensure optimal performance with the comprehensive Operation & Maintenance Manual available for free download from our website, providing detailed instructions and guidelines. Maintain your equipment's longevity and reliability with this essential manual.

Share
Download
background image

FEATURES

B-Series switches have proven reliable
in such harsh environments as:

• Offshore oil rigs

• Chemical and petrochemical plants

• Pulp and paper mills

• Steel mills

• Power plants

• Water and sewage-treatment plants

• Other corrosive environments

B-Series Switches – Pressure, Differential
Pressure, Temperature & Hydraulic

Ashcroft Inc. supplies highly reliable

Ashcroft

®

switches and controls for indus-

trial and process applications. We begin
with rock-solid designs, matching the most
appropriate technology with the safety and
reliability requirements of the applications.
The materials of construction are specified
to Ashcroft’s exacting standards, and prod-
uct is built to last in the toughest applica-
tions. Our modern, responsive manufactur-
ing facility is supported by an extensive
network of stocking distributors and factory
sales offices located in virtually every part
of the world. Special application assistance
is always just a telephone call away.

The Ashcroft B-Series switch line is

designed to satisfy most switch require-
ments. Materials of construction have been
selected for long life. A wide variety of pre-
cision switch elements are available to
meet every application requirement,
including hermetically sealed contacts for
added reliability and safety. The actuators
we use have been proven in more than 20
years of service in the world’s plants and
mills. Special designs are available for fire
safety, NACE, limit control and other more
stringent requirements. Simplicity and
ease of use are stressed to improve relia-
bility of the installation.

Applications include: pumps, compres-

sors, washers, filters, degreasers, evapora-
tors, recovery systems, food processing,
ground support equipment, reverse osmo-
sis systems, heat exchangers, hydraulic
systems, lubrication systems, marine
equipment, textile machinery, heating and
air conditioning equipment.

BULLETIN SW10

Ashcroft Inc., 250 East Main Street, Stratford, CT 06614 USA
Tel: 203-378-8281 • Fax: 203-385-0408
email: [email protected] • www.ashcroft.com

All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© Ashcroft Inc. 2007 10/08 

Thermowells

Thermowells must be used on any appli-

cation where the stem of the temperature
switch may be exposed to pressure, cor-
rosive fluids or high velocity. Additionally,
the use of a thermowell permits instrument
interchange or calibration check without
disturbing or closing down the process.

Ashcroft temperature switches have

bulb diameters to match 

3

⁄

8

˝ nominal bore

thermowells. The bulbs have a sensitive
portion length of 2˝ which can be used
with 2

1

⁄

2

˝ “U” dimensioned thermowells or

longer. For maximum accuracy, a thermo-
well’s “U” dimension should be selected
to permit complete immersion of the sen-
sitive portion plus 1˝ when measuring the
temperature of liquids; an extra 3˝ should
be allowed when measuring the temper-
ature of gases.

Thermowell bushings should be used

with remote mount temperature switches.
We recommend the standard 3˝ bulb and
code 69 Series bushings for use with any
thermowell “U” dimension. A split rubber
grommet allows easy installation and “S”
dimension adjustment.

Summary of Contents for BN 5-12 Series






















































































































































































































































































































Reviews:

No comments

Related manuals for BN 5-12 Series

Jandy JCP Series Installation And Operation Manual preview
JCP Series
Brand: Jandy Pages: 108
Elkay EFHA8 Installation Instructions preview
EFHA8
Brand: Elkay Pages: 2
Nibe FIGHTER 2010 Series Installation And Maintenance Instructions Manual preview
FIGHTER 2010 Series
Brand: Nibe Pages: 36
Fairland Pioneer PHC18L Installation And Operating Instructions Manual preview
PHC18L
Brand: Fairland Pioneer Pages: 36
SAER Elettropompe FF98 Use And Maintenance Manual preview
FF98
Brand: SAER Elettropompe Pages: 44
Oase Biotec 12 Operating Instructions Manual preview
Biotec 12
Brand: Oase Pages: 42
W'eau MiniPool YC-005TB1 Installation & Operation Manual preview
MiniPool YC-005TB1
Brand: W'eau Pages: 14
SpacePak SIM-036 Installation Manual preview
SIM-036
Brand: SpacePak Pages: 48
NAKAYA PRO SP1315 Manual preview
PRO SP1315
Brand: NAKAYA Pages: 47
Wilo Actun OPTI-QS Series Installation And Operating Instructions Manual preview
Actun OPTI-QS Series
Brand: Wilo Pages: 364
AmeriWater MediQA Diagnostics Manual preview
MediQA
Brand: AmeriWater Pages: 66
QED GRACO TORPEDO G1275-2P100 Operation, Troubleshooting Manual preview
GRACO TORPEDO G1275-2P100
Brand: QED Pages: 12
DAYLIFF DWW Series Installation & Operating Manual preview
DWW Series
Brand: DAYLIFF Pages: 12
Oceanic Steam Aroma Assembly And Operating Manual preview
Steam Aroma
Brand: Oceanic Pages: 8
TapFlo Metal Series Original Instruction preview
Metal Series
Brand: TapFlo Pages: 56
STIEBEL ELTRON PSH 100 EL Operation And Installation preview
PSH 100 EL
Brand: STIEBEL ELTRON Pages: 100
Oerlikon Leybold Vacuum COOLPOWER 5/100 Installation And Operating Instructions Manual preview
COOLPOWER 5/100
Brand: Oerlikon Leybold Vacuum Pages: 32
VOX electronics WHF 10021 User Manual preview
WHF 10021
Brand: VOX electronics Pages: 20

Brands by name

Popular brands

Load more brands