Seepex BN 5-12 Series, Operation & Maintenance Manual

Page: 240 / 309

www.weg.net
Manual of Electric Motors 71
E
N
G
LI
S
H
2. Lower the hoist fixed to motor drive end while lifting the hoist fixed to motor non-drive end until the motor
reaches its equilibrium, see Figure 4.13;
3. Remove the hoist hooks from the drive end eyebolts and rotate the motor 180° to fix the removed hooks into
the two eyebolts at the motor non-drive end, see Figure 4.14;
4. Fix the removed hoist hooks in the other two eyebolts at the non-drive end and lift the motor until the vertical
position is reached, see Figure 4.15.
These procedures will help you to move motors designed for vertical mounting. These procedures are also
used to place the motor from the horizontal position into the vertical position and vertical to horizontal.
Figure 4.13 - Placing HGF motor in vertical position
Figure 4.14 - Lifting HGF motors by the eyebolts at the non-drive end
Figure 4.15 - HGF motor in the vertical position
4.2 Procedures to place W22 vertical mount motors in horizontal position
To place W22 vertical mount motor in horizontal position, proceed as follows:
Page 142