Seepex BN 5-12 Series, Operation & Maintenance Manual

Page: 175 / 309

Assembly and Operating Instructions – Gear Units R..7, F..7, K..7, K..9, S..7, SPIROPLAN® W
59
4
Coupling of AM adapters
Mechanical Installation
4.10.2 Permitted loads
Gear unit series R..7, F..7, K..7, K..9, and S..7:
Gear unit series SPIROPLAN
®
W37 – W47:
CAUTION
Impermissibly high loads may occur when mounting a motor.
Potential damage to property
• The load data specified in the following table are not to be exceeded.
18513419
Adapter type F
q
1)
[N]
IEC NEMA x
1)
[mm] IEC adapter NEMA adapter
AM63/71 AM56 77 530 410
AM80/90 AM143/145 113 420 380
AM100/112 AM182/184 144 2000 1760
AM132
2)
AM213/2152
2)
186
1600 1250
AM132.. AM213/215 4700 3690
AM160/180 AM254/286 251 4600 4340
AM200/225 AM324-AM365 297 5600 5250
AM250/280 - 390 11200 –
1) The maximum permitted weight of the attached motor F
qmax
must be reduced linearly as the center of
gravity distance x increases. If this distance is reduced, the maximum permitted weight F
qmax
cannot be
increased.
2) Diameter of the adapter output flange: 160 mm
Adapter type F
q
1)
[N]
IEC NEMA x
1)
[mm] IEC adapter NEMA adapter
AM63/71 AM56 115 140 120
AM80/90 AM143/145 151 270 255
1) The maximum permitted weight of the attached motor F
qmax
must be reduced linearly as the center of
gravity distance x increases. If this distance is reduced, the maximum permitted weight F
qmax
cannot be
increased.
X
Fq
Page 77