Seepex BN 5-12 Series Operation & Maintenance Manual Download Page 210

Page: 210 / 309

Assembly and Operating Instructions – Gear Units R..7, F..7, K..7, K..9, S..7, SPIROPLAN® W

105

Churning losses

Mounting Positions

7.2

Churning losses

7.3

Mounting position MX

Mounting position MX is available for all gear units of the R..7, F..7, K..7, K..9, S..7 and

SPIROPLAN

W series.

For mounting position MX, the gear units are delivered with the maximally possible

amount of oil and sealed with oil screw plugs. A breather valve is included with each

drive. The customer will have to adjust the oil quantity to the proper level depending on

the final mounting position in which the gear unit will be operated. Customers will also

have to mount the enclosed breather valve at the proper location depending on the

mounting position, see mounting position sheets.
The correct oil level must be checked according to chapter "Checking the oil level and

changing the oil" (page 89).

7.4

Universal mounting position M0

SPIROPLAN

W10 – W30 gearmotors can be ordered with M0 universal mounting po-

sition as an option. Gear units with mounting position M0 are filled with the standard

amount of oil.
These gear units are entirely enclosed due to their small size. They can therefore be de-

signed without breather valve. Customers can use the gear unit universally in every

mounting position (M1 – M6) without having to take any measures prior to startup.

→

Page XX

Churning losses may occur in some mounting positions. Contact SEW-EURODRIVE

in case of the following combinations:

Mounting position

Gear unit type

Gear unit size

Input speed

[rpm]

M2, M4

97 – 107

> 2500

> 107

>1500

M2, M3, M4, M5, M6

97 – 107

> 2500

> 107

> 1500

77 – 107

> 2500

> 107

> 1500

77 – 97

> 2500

kVA

Page 112

Summary of Contents for BN 5-12 Series






















































































































































































































































































































Search results

Summary of Contents for BN 5-12 Series

Reviews:

Related manuals for BN 5-12 Series

Brands by name

Popular brands

Seepex BN 5-12 Series, Operation & Maintenance Manual

Search results

Summary of Contents for BN 5-12 Series

Reviews:

Related manuals for BN 5-12 Series

Brands by name

Popular brands