Seepex BN 5-12 Series, Operation & Maintenance Manual

Page: 145 / 309

Shut-Down Plan
SEEPEX , Inc.
511 Speedway Dr.
Enon, OH 45323
Phone (937) 864-7150
Fax (937) 864-7157
www.seepex.com
Customer
Project Name
Customer PO No.
Pump Tag No.’s
SEEPEX Commission No.
SEEPEX Order No.
Pump Type Code
Shut-Down Checklist
No. Description Completed by Date
1
Short term:
1.1 Disconnect power to pump driver local or as required.
1.2 Close all valves on suction and discharge.
1.3 Shut off seal water (if applicable).
2 Long-term: (also follow long term storage per O&M)
2.1 Follow short term instructions.
2.2 Rotate pump shaft once per week.
2.3 Remove drain plug to facilitate drying suction housing.
2.4 Drain suction housing to prevent freezing.
2.5 For packing; fill stuffing box with grease.
2.6 For mechanical seal; fill stuffing box with light oil.
2.7
If pump is not installed place covers over suction and discharge
openings to prevent ingress of foreign substances.
2.8 Store pump in a cool dry atmosphere.
2.9 Energize motor heaters if installed.
Note: This is to be signed by a qualified SEEPEX, Inc.employee or representative. The below date signifies the date
that the shut-down was completed.
________________________________/___________________
___________________________
SEEPEX , Inc. / SEEPEX Representative Date Company
________________________________/___________________
___________________________
Owner or / Owner Representative Date Company
Signature confirms that to the best of your knowledge, all of the parameters have been met for the successful
shutdown of the pump listed by commission number/(s) above.
Page 215