HandKey II Manual
43
Management Menu
This menu lets you list all of the users in the reader. If the reader is a master reader, it
also lets you send/receive user databases to/from readers in a network and check to see
if a particular reader on the network is communicating.
See
Getting to the Menus in the Reader
on page 34 and
Navigating the Menus
on page 35
for help getting to or moving around this menu.
List Users lets you navigate and display the list of
enrolled users in the reader.
The display shows something like this:
Press * (No) if you don’t want to look at any more
users; press # (Yes) to show another record.
Data from Network lets the master reader get the
entire user set from any reader on the network.
Users enrolled at the remote reader whose IDs
aren’t in the master reader are added to the
master set. If a user ID is already in the master,
the information for the user in the master reader is
replaced by the information from the remote
reader.
Used with Data to Network (explained below), Data
from Network lets you enroll users in one reader
then transfer them to other readers. This command
is available only in the master reader.
This option assumes that you have enough memory
in the reader for all of the users. If you try to transfer
users from one reader to another when one of the
readers doesn’t have enough memory to store all of the users, the reader simply transfers
as many users as it can. You would not get any warning that some users were not
transferred. If you need to, you can upgrade the reader’s memory so that it can hold more
users; see page 42.
What You Can
Do with This
Menu
Getting to This
Menu
LIST USERS
*BACK #NEXT
To change this setting, press enter.
You see:
USERS ENROLLED
12
MORE
*NO #YES
In this example, 12 users are enrolled
in the reader.
To learn about each user, press # for
Yes. The display shows something
like what’s shown on the left.
Listing Users
DATA FROM NETWORK
*BACK #NEXT
To get the user database from
another networked reader, press
enter. You’ll see:
INPUT ADDRESS
Type the address (0-31) of the reader
to get users from and press enter.
You’ll see:
NETWORK DB UPLOAD
PLEASE WAIT . . .
Getting Users
from Other
Readers
user ID number
Schlage Biometrics
internal use, not
relevant to daily use
reject
threshold
authority
level
150057
5 0 17
MORE
*NO #YES
