Settings
P746/EN
ST/G31
MiCOM P746
(ST) 4-
17
ST
Setting Range
Menu Text
Default Setting
Min. Max.
Step Size
IRIG-B Status
Data
Card not fitted/Card failed/ Signal
healthy/No signal
Displays the status of IRIG-B (with Irig-B option).
Battery Status
Data
Displays whether the battery is healthy or not.
Battery Alarm
Enabled
Disabled or Enabled
Setting that determines whether an unhealthy relay battery condition is alarmed or not.
SNTP Status
Data
Disabled, Trying Server 1, Trying Server
2, Server 1 OK, Server 2 OK, No
response, No valid clock
For Ethernet option only:
Displays information about the SNTP time synchronization status
LocalTime Enable
Disabled
Disabled/Fixed/Flexible
Setting to turn on/off local time adjustments.
Disabled - No local time zone will be maintained. Time synchronisation from any interface
will be used to directly set the master clock and all displayed (or read) times on all
interfaces will be based on the master clock with no adjustment.
Fixed - A local time zone adjustment can be defined using the LocalTime offset setting
and all interfaces will use local time except SNTP time synchronisation and IEC61850
timestamps.
Flexible - A local time zone adjustment can be defined using the LocalTime offset setting
and each interface can be assigned to the UTC zone or local time zone with the exception
of the local interfaces which will always be in the local time zone and IEC61850/SNTP
which will always be in the UTC zone.
LocalTime Offset
0
-720
720
15
Setting to specify an offset of -12 to +12 hrs in 15 minute intervals for local time zone. This
adjustment is applied to the time based on the master clock which is UTC/GMT
DST Enable
Disabled
Disabled or Enabled
Setting to turn on/off daylight saving time adjustment to local time.
DST Offset
60mins
30
60
30min
Setting to specify daylight saving offset
which will be used for the time adjustment to local
time.
DST Start
Last
First, Second, Third, Fourth, Last
Setting to specify the week of the month in which daylight saving time adjustment starts
DST Start Day
Sunday
Monday, Tuesday, Wednesday, Thursday,
Friday, Saturday
Setting to specify the day of the week in which daylight saving time adjustment starts
DST Start Month
March
January, February, March, April, May,
June, July, August, September, October,
November, December
Setting to specify the month in which daylight saving time adjustment starts
DST Start Mins
60min
0
1425
15min
Setting to specify the time of day in which daylight saving time adjustment starts. This is
set relative to 00:00 hrs on the selected day when time adjustment is to start.
Summary of Contents for MiCOM P746
