scheider electric MiCOM P746, Technical Manual

Page: 224 / 530

P746/EN PL//G31 Programmable Logic
(PL) 7-
28
MiCOM P746
PL
1.8 Factory default programmable scheme logic
The following section details the default settings of the PSL. The P746 models are as
follows:
Relay Outputs
Model Logic Inputs
Total relays
High break
relays
P746xxxA 16 16 16 --
P746xxxB 16 16 8 8
P746xxxC 16 32 32 --
P746xxxD 16 32 24 8
P746xxxE 24 24 24 --
P746xxxF 24 24 16 8
P746xxxG 24 24 8 16
P746xxxH 32 24 24 --
P746xxxJ 32 24 16 8
P746xxxK 40 24 24 --
P746xxxL 32 32 32 --
1.9 Logic input mapping
The default mappings for each of the opto-isolated inputs are as shown in the following table:
Opto-Input
Number
P746 Relay Text Function
1 Input L1 CB1 Closed
2 Input L2 CB2 Closed
3 Input L3 CB3 Closed
4 Input L4 CB4 Closed
5 Input L5 CB5 Closed
6 Input L6 CB6 Closed
7 Input L7 T11 Closed
8 Input L8 T21 Closed
9 Input L9 T32 Closed
10 Input L10 T42 Closed
11 Input L11 T51 Closed
12 Input L12 T52 Closed
13 Input L13 T61 Closed
14 Input L14 T62 Closed
15 Input L15 Block CZ
16 Input L16 Not mapped
17 Input L17 Not mapped
18 Input L18 Not mapped
19 Input L19 Not mapped