None (No Pre-alarm recording)
Short (Short Pre-alarm recording time)
Medium (Standard Pre-alarm recording time)
Long (Long Pre-alarm recording time)
Audio:
Turn ON/OFF audio recording for each camera.
Protocol:
Set the PTZ operation protocol for each camera.
Adr:
Set the PTZ operation address for each camera (1 to 127).
The video data transmission speed and the remaining recording time calculated based on the values you set in the Camera setting table are shown.
Estimated BitRate: Video data transmission speed
OverWrite: Overwrite recording status (ON/OFF)
Remain: Remaining recording time (in days)
If you want to change the camera title shown with the camera's video etc., type here a new title with a length of 22 characters or less.
Default setting: CAM01 to CAM16
Clicking a camera number in the Camera setting table causes the video from the selected camera to appear in the Preview area.
Set the encoding format.
Setting options: MPEG4 and MPEG4+
These five index tabs are used to access detailed condition settings.
Configure the motion sensor feature that senses any motion in the target.
Size: Shows each camera's size setting automatically.
Quality: Honors each camera's quality setting, which is not shown in the setting table, however.
Audio: Select the [Network Camera] tab, click
, and access [Network camera detail settings] to configure the audio setting.
Audio recording is not possible if the [Duration] setting is "3 Sec" or less.
Right-clicking a header cell of the list and then selecting [All camera config copy] in the context menu applies the predefined setting to all cameras (not applicable to
the [Camera] column).
When connecting a network camera to the digital video recorder, turn OFF the camera's SSL setting.
The video from network cameras is not output to the MON1/MON2 (video output) terminals and the Zoom panel.
Detail Setup
In the Preview area, portions where any motion is sensed under the configured conditions will be indicated by blue rectangles.
These rectangles are shown based on the sensing sensitivity and sensing area settings currently stored in the system.
If you have changed any of these sensing conditions, click the [Exit] setting button to save the settings you have configured.
61/182
ページ
2008/10/27
