Camera states such as the orientation and zoom magnification can be registered as preset positions. You can register up to 12 preset positions.
Click the camera's video.
The video image is now displayed in a single-screen layout.
Click .
The button is now highlighted.
Select the Registration check box.
Set the camera orientation using the PAN/TILT controller.
Adjust also the zoom, focus, and iris settings as required.
Select a preset number.
The selected preset number is used to register camera states such as the current orientation and zoom magnification as a preset position.
Click
and deselect the Registration check box.
The button returns to the normal display (no more highlighted). The preset position has been registered.
Before performing PTZ operations, configure the [Protocol] setting in the Camera settings accessible from the SETTINGS screen.
The features you can control using the Camera Control panel depend on the camera model.
Zoom
1
Use
/
to zoon in/out the video.
Tel
Wide
Focus
2
Use
or
to adjust the focus.
Near
Far
Iris
3
Use
or
to adjust the iris.
Open
Close
Preset numbers
4
Use these buttons to select a registration number for each preset position.
Preset
5
Use this button to register a preset position or orient the camera to a preset position.
Registration
check box
6
Use this check box to enable or disable the preset position registration.
Pattern
7
Use this button to continuously execute a registered pattern of movements (movements
according to a trajectory or command).
P-run
8
Use this button to move the camera around two or more preset positions in the order of the
preset numbers so that you can monitor what's happening in these positions.
A-run
9
Use this button to move the camera to and fro between two preset positions.
Menu
10
Use this button to display the camera's menu setting screen.
Enter
11
Use this button to display the camera's menu setting screen.
Use this button to switch to the next screen, or enter the setting value you typed.
Aux 1- 2
12
Reserved for additional features.
(For how to use these buttons, consult the dealer from which you purchased the digital video
recorder.)
PAN/TILT
controller
13
Use this control to adjust the orientation of the camera.
Camera
number
14
The currently selected camera number is shown.
Mouse control
15
Select this check box to use the mouse to control the camera orientation.
Speed
16
Use this slider bar to set how fast you can move around on the image during panning/tilting or
screen shooting.
The speed increases as you move the slider bar to the right.
Protocol
information
17
The currently selected PTZ protocol is shown.
The preset positions may also be registered and deleted from the [PTZ] tab of the Camera settings accessible from the SETTINGS screen.
1
2
Preset
3
4
5
6
Preset
19/182
ページ
2008/10/27
