manualshive.com logo in svg

Samsung S3C2451X, User Manual, Page: 719 / 756

Share
Download
Samsung S3C2451X User Manual Download Page 719

Preliminary

S3C2451X RISC MICROPROCESSOR

 

 

                                           PCM AUDIO INTERFACE 

 

28

-13 

Preliminary product information describe products that are in development,

 

for which full characterization data and associated errata are not yet available.
Specifications and information herein are subject to change without notice.

PCM_IRQ_CTLn Bit 

Description 

Initial 

State

TXFIFO_ERROR_ 
STARVE 

[7] 

Interrupt is generated for TxFIFO starve ERROR. 
This occurs whenever the TxFIFO is read when it is still 
empty. This is considered an ERROR and will have 
unexpected results 
1: IRQ source enabled 
0: IRQ source disabled 

0 

TXFIFO_ERROR_ 
OVERFLOW 

[6] 

Interrupt is generated for TxFIFO overflow ERROR. 
This occurs whenever the TxFIFO is written when it is already 
full. This is considered an ERROR and will have unexpected 
results 
1: IRQ source enabled 
0: IRQ source disabled 

0 

RXFIFO_EMPTY 

[5] 

Interrupt is generated whenever the RxFIFO is empty 
1: IRQ source enabled 
0: IRQ source disabled 

0 

RXFIFO_ALMOST_ 
EMPTY 

[4] 

Interrupt is generated whenever the RxFIFO is 
ALMOST_EMPTY which is defined as RX_FIFO_DEPTH < 
RX_FIFO_DIPSTICK 
1: IRQ source enabled 
0: IRQ source disabled 

0 

RX_FIFO_FULL 

[3] 

Interrupt is generated whenever the RxFIFO is full 
1: IRQ source enabled 
0: IRQ source disabled 

0 

RX_FIFO_ALMOST_ 
FULL 

[2] 

Interrupt is generated whenever the RxFIFO is 
ALMOST_FULL which is defined as RX_FIFO_DEPTH > (32 
– RX_FIFO_DIPSTICK) 
1: IRQ source enabled 
0: IRQ source disabled 

0 

RXFIFO_ERROR_ST
ARVE 

[1] 

Interrupt is generated for RxFIFO starve ERROR. 
This occurs whenever the RxFIFO is read when it is still 
empty. This is considered an ERROR and will have 
unexpected results 
1: IRQ source enabled 
0: IRQ source disabled 

0 

Summary of Contents for S3C2451X





















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments