manualshive.com logo in svg

Samsung S3C2451X, User Manual, Page: 647 / 756

Share
Download
Samsung S3C2451X User Manual Download Page 647

Preliminary

S3C2451X RISC MICROPROCESSOR

 

 

ADC AND TOUCH SCREEN INTERFACE 

 

24-7 

Preliminary product information describe products that are in development,

 

for which full characterization data and associated errata are not yet available.
Specifications and information herein are subject to change without notice.

ADC START DELAY (ADCDLY) REGISTER  

Register Address 

R/W 

Description 

Reset 

Value

ADCDLY 

0x58000008 

R/W 

ADC start or interval delay register 

0x00ff 

 

ADCDLY Bit 

Description 

Initial 

State

DELAY 

[15:0] 

Incase of ADC conversion mode (Normal, Separate, Auto 
conversion);  
ADC conversion is delayed by counting this value. Counting clock is 
PCLK. 

In case of waiting for interrupt mode;                                                        
When stylus down occurs in waiting for interrupt mode, counts this 
value and then generates Interrupt signal (INT_TC) for filtering noise. 
Counting clock is external input clock (X-tal or EXTCLK). 

Note:

   Do not use zero value (0x0000)  

0x00ff 

 

 

 

Summary of Contents for S3C2451X





















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments