Home
/
Samsung
/
S3C2451X
/
User Manual

Samsung S3C2451X, User Manual, Page: 373 / 756

Share

Page: 373 / 756

Samsung S3C2451X User Manual Download Page 373

Preliminary

S3C2451X RISC MICROPROCESSOR

USB2.0 DEVICE

17-1

Preliminary product information describe products that are in development,

for which full characterization data and associated errata are not yet available.
Specifications and information herein are subject to change without notice.

17

USB 2.0 FUNCTION

OVERVIEW

The Samsung USB 2.0 Controller is designed to aid the rapid implementation of the USB 2.0 peripheral device.
The controller supports both High and Full speed mode. Using the standard UTMI interface and AHB interface the
USB 2.0 Controller can support up to 9 Endpoints (including Endpoint0) with programmable Interrupt, Bulk mode.

FEATURE

— Compliant to USB 2.0 specification

— Supports FS/HS dual mode operation

— EP 0 FIFO: 64 bytes.

— EP 1/2/3/4 FIFO: 512 bytes double buffering

— EP 5/6/7/8 FIFO: 1024 bytes double buffering

— Convenient

Debugging

— Support Interrupt, Bulk, Transfer

«
...
371
372
373
374
375
...
»

Summary of Contents for S3C2451X





















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments