Samsung DCS Programming Manual Download Page 376

Page: 376 / 410

SAMSUNG

MMC PROGRAMS

COMBINED SYSTEMS PROGRAMMING MANUAL

FEBRUARY 2004

MMC 835 (Page 3 of 4)

500 MGI Card & Procedure

Note that some of the following options may not apply to the card being programmed (MGI1,
2 or 3).

AUDIO CODEC

Selects which audio codec compression to use. Selections are G.711

(64K), G.723.1 (6.4K), G.729A (8K) and G.729.

ECHO CANCEL

Enables or disables echo cancellation (0: disable, 1:enable). This

function removes echo that is generated by voice reflection and

packet delay.

SILENCE SUPPRESS

Determines whether silence suppression is used (0: disable, 1: en-

able). This prevents transmission during the silence period of a call.

INPUT FILTER

Selects input filtering of the DSP (0: disable, 1: enable). This should

be set to ON.

OUTPUT FILTER

Selects output filtering of the DSP (0: disable, 1: enable). This should

be set to ON.

INPUT GAIN

PCM input gain value of DSP. The range is -31dB to 31dB (0–63).

This sets the volume of PCM voice from the VOIP DSP to the site.

VOICE VOLUME

Selects the voice volume. The range is -31dB to 31dB (0–63).

FRAME COUNT

This option selects the number of frames the MGI will consolidate in

the packet message. The voice packets are buffered to the set num-

ber and sent as a single packet. The range is 1–12.

JITTER OPTION

Selects the dynamic jitter specific value. Value determines whether

the focus is on packet loss or packet delay. The range is 00–12.

MIN JITTER

Sets minimum value for jitter buffer.

MAX JITTER

Sets maximum value for jitter buffer.

FAX ECM

Sets additional recovery function for FAX transfer errors when using

T.38 Fax.

MAX FAX COUNT

Sets maximum number of allowed Internet FAX channels.

DTMF TYPE

Sets whether to transmit the DTMF signal through the voice channel

(INBAND) or through a separate message (OUTBAND).

TOS FIELD

Defines Type of Service packets.

ACTION

DISPLAY

1. Open programming and select

835

Display shows

MGI1:AUDIO CODEC

G.723.1

2. Press VOLUME keys to select MGI card (1-3) e.g.

MGI1

MGI1:AUDIO CODEC

G.723.1

3. Press VOLUME keys to select option (e.g. ECHO

CANCEL) and press RIGHT soft key

MGI1:ECHO CANCEL

ENABLE

4. Press VOLUME keys to select enable/disable and

press RIGHT soft key

MGI1:ECHO CANCEL

DISABLE

Summary of Contents for DCS



























































































































































































































































































































































































































Search results

Summary of Contents for DCS

Reviews:

Related manuals for DCS

Brands by name

Popular brands

Samsung DCS, Programming Manual

Search results

Summary of Contents for DCS

Reviews:

Related manuals for DCS

Brands by name

Popular brands