Samsung DCS Programming Manual Download Page 166

Page: 166 / 410

SAMSUNG

MMC PROGRAMS

COMBINED SYSTEMS PROGRAMMING MANUAL

FEBRUARY 2004

MMC 419 (Page 1 of 3)

MMC: 419

BRI OPTIONS

FOR: DCS CI CII 816 408i

DCS100

DCS500

OS500

Purpose

: This MMC comprises two groups of options. One group is for the "TRUNK"

ports and the other is for the "STATION" ports as set in

MMC 423, S/T Mode

Be aware

that some options may not be available on your system.

Note:

1 For each BRI access, two adjacent ports are assigned. You need only change the value for

one of the two ports; the value for the other port will be changed automatically.

2 If changes are made using this MMC, the BRI card affected must be restarted using

MMC

418, Card Restart.

Ports Programmed as "TRUNK" in MMC 423

Display shows "BRI-TRK". Items to select include some or all of the following: CHANNEL
ANY, BRI MODE, DLSEND, BRI CODING, CLIP TABLE and NB TYPE.

•

CHANNEL ANY

This field can be set to YES or NO and is referenced when a user attempts an outgo-

ing call while that port is busy.

If CHANNEL ANY is NO, the user hears busy tone.

If CHANNEL ANY is YES, the system checks if the adjacent port (another B channel

in the same BRI access) is free. If it is free, the user can call through that port. Oth-
erwise, the user hears busy tone.

•

BRI MODE

P-P DDI

When BRI line is point-to-point configuration and is a DDI line. Incoming
calls are placed as set in

MMC 714 (DDI Number & Name Translation)

All incoming calls through the DDI trunk will be placed according to the
setting of the DDI table.

P-M NOR

: When BRI line is point-to-multipoint configuration and is not an MSN line

Incoming calls are placed as set in

MMC 406 (Trunk Ring Assignment)

P-M MSN

: When BRI line is point-to-multipoint configuration and is an MSN line.

The system can manage up to eight MSN numbers for each MSN BRI
access. Incoming calls through P-MP MSN ports are handled as set in

MMC 421 (MSN Digit

). Each BRI access requires its own table.

P-P NOR

: When BRI line is point-to-point configuration and is not a DDI line. In-

coming calls are placed as set in

MMC 406 (Trunk Ring Assignment).

•

DLSEND

This field is provided to set the dial sending mode to "enblock" or "overlap" on an in-

dividual port basis. If enblock, digits are sent in a single block; if overlap, digits are
sent as they dialled.

Summary of Contents for DCS



























































































































































































































































































































































































































Search results

Summary of Contents for DCS

Reviews:

Related manuals for DCS

Brands by name

Popular brands

Samsung DCS, Programming Manual

Search results

Summary of Contents for DCS

Reviews:

Related manuals for DCS

Brands by name

Popular brands