Samsung DCS Programming Manual Download Page 16

Page: 16 / 410

SAMSUNG

INTRODUCTION

COMBINED SYSTEMS PROGRAMMING MANUAL

FEBRUARY 2004

1–6

1.6 Programming Procedures

1.6.1 Precautions When Programming

•

The keyset must be on-hook (handset down) to allow programming.

•

Programming can be done on any digital keyset with an LCD.

•

Programming is available only on digital telephones (not analogue ones).

•

If ‘INVALID DATA’ appears in the LCD while programming, you should re-enter the

correct data.

•

When you have successfully completed an entry, the display automatically changes

for the next step.

•

Programming halts if you have not pressed a key for a certain period of time. This is

30 seconds by default, but can be changed in

MMC 501

(KMMC Lock Out timer).

•

Programming halts if you pick up the handset while programming.

•

If you pick up the handset while programming, or the telephone plug is pulled out,

any new data shown in the LCD are saved.

MPORTANT

When installing and programming a ‘default’ system for the first time

You should select the correct software version for your country (e.g. “UK”)

before

you

can do any other programming via either a keyphone (KMMC programming) or a PC

(PCMMC programming). To select the country:

1. Press the Transfer / TRSF key.

2. Enter 800 followed by the default passcode (4321)

The system sounds a warning and displays on the keyset:

Use the VOLUME Up/Down keys to select the country and press the RIGHT soft key.

The keyset displays:

Use the VOLUME Up/Down keys to select YES and press the RIGHT soft key. When

defaulted to the correct version, you can open programming (see

1.6.2

). The country

version selected can be changed in

MMC 812 (Select Country).

ENABLE TECH. PROG
SELECT COUNTRY

DEFAULTING SYSTM
ARE YOU SURE?NO

Summary of Contents for DCS



























































































































































































































































































































































































































Search results

Summary of Contents for DCS

Reviews:

Related manuals for DCS

Brands by name

Popular brands

Samsung DCS, Programming Manual

Search results

Summary of Contents for DCS

Reviews:

Related manuals for DCS

Brands by name

Popular brands