SAMSUNG
MMC PROGRAMS
COMBINED SYSTEMS PROGRAMMING MANUAL
FEBRUARY 2004
MMC 709 (Page 1 of 2)
MMC: 709
TOLL PASS CODE
FOR:
ALL
SYSTEMS
Purpose:
Sets codes and numbers valid for the following options:
0 PBX CODE
Identifies the access codes needed to work toll restriction (call barring) when the system
is used with either a PBX or CENTREX-supplied dial tone (PBX ACCESS CODE option).
A maximum of five entries is allowed (two for 408/408i systems). Toll restriction is ap-
plied only to trunks flagged as PBX in
1 SPECIAL CODE
Identifies the access codes needed to work toll restriction when operating special C.O.-
provided functions (SPECIAL CODE option)—a maximum of 10 entries is allowed, each
up to four digits.
i
DCS & OS500 systems also provide the following options:
2 TOLL OVERRIDE
This table of eight entries is used to identify numbers that will bypass all dialling restric-
tions including toll restriction, trunk access and forced authorisation and account codes.
Each entry in the table can be up to 14 digits long.
3 OVRD USE TRK GRP
Designates the trunk group to use if a toll override number is dialled.
ACTION
DISPLAY
1. Open programming and select
709
Display shows
PBX ACCESS CODE
1:
2. Dial option 0 or 1 (or 0–3 for
i
DCS) e.g. 0
OR
Press VOLUME keys to make selection and press
RIGHT soft key to move cursor
PBX ACCESS CODE
1:
3. Enter code index number (e.g., 2)
OR
Press VOLUME keys to make selection
Press RIGHT soft key to move cursor
PBX ACCESS CODE
2:_
4. Enter the desired access/feature code (max. 4
digits, e.g., 9)
PBX ACCESS CODE
2:9