Samsung CLX-9251 Series Service Manual Download Page 149

Page: 149 / 481

3. Disassembly and Reassembly

3.3.17. Regi_MP Drive unit

Remove the rear cover. (Refer to 3.3.2)

Unplug the connector. Remove 3 screws. And the
remove the Regi_MP Drive Unit.

3.3.18. Toner Supply Drive unit

Remove the rear cover. (Refer to 3.3.2)

Remove the Main board shield. (Refer to 3.3.12)

Unplug the connector. Remove 2 screws. And then
remove the Toner supply drive unit.

NOTE

•

To remove K Toner supply drive unit, first remove
the main drive unit.

•

The toner supply drive units are exchangeable.

3-27

Summary of Contents for CLX-9251 Series

























































































































































































































































































































































































































































































Search results

Summary of Contents for CLX-9251 Series

Reviews:

Related manuals for CLX-9251 Series

Brands by name

Popular brands

Samsung CLX-9251 Series, Service Manual

Search results

Summary of Contents for CLX-9251 Series

Reviews:

Related manuals for CLX-9251 Series

Brands by name

Popular brands