Samsung CLX-9251 Series Service Manual Download

Page: 147 / 481

3. Disassembly and Reassembly

3.3.13. Main Drive unit

Remove all developer units and drum units.

Remove the rear cover. (Refer to 3.3.2)

Unplug all connectors connecting the main drive unit.
Release the harness from the holder.

Remove the main drive unit after removing 9 screws.

3.3.14. Fuser/Exit Drive unit

Remove the rear cover. (Refer to 3.3.2)

Unplug 2 motor connectors. Remove 3 screws. And
then remove the Fuser/Exit Drive unit.

3-25

Summary of Contents for CLX-9251 Series

























































































































































































































































































































































































































































































Search results

Summary of Contents for CLX-9251 Series

Reviews:

Related manuals for CLX-9251 Series

Brands by name

Popular brands

Samsung CLX-9251 Series, Service Manual

Search results

Summary of Contents for CLX-9251 Series

Reviews:

Related manuals for CLX-9251 Series

Brands by name

Popular brands