3-10
Setting your machine
Date en cours : 9 février 2005
C:\Documents and Settings\G097447\Bureau\MFK V2 LU 251 816 433A MF 3725 GB\Configuration Gb.fm
Press the M
ENU
key.
Switch your terminal off and then back on again. You have now finished configuring the IP
address.
Remark
:
Other print-related settings are described in the Print Functions chapter.
R
EMOTE
CONFIGURATION
You can configure the same settings either remotely or locally.
System requirements
To remotely configure your machine you will need:
• a Web browser (preferably Internet Explorer version 4),
• to make the Local Network settings for your machine (IP address, subnet mask, etc.). You should
ask your network administrator for these settings. Once you have this information, please see the
paragraph on
Local network settings
, page 3-6 on how to fill out the necessary fields.
Accessing the Web Server
Open a Web browser from a PC registered on the network.
Enter the IP address of the terminal you want to configure in the Address field.
Confirm by pressing E
NTER
.
The welcome window is displayed, choose the interface language.
Change the settings of your choice on the screen then confirm.
F
AX
S
ERVER
(
DEPENDING
ON
OPTION
)
You can send telecopies to a fax machine which is compatible with your terminal. This type of emission
is only possible if a fax server is installed on your LAN network, and if the "Fax Server" function is
activated on your terminal (menu 83).
Access to Connexion Type
831 OK
-
ADVANCED FCT
/
FAX SERVER
/
CONNECT TYPE
Select one of the following connection option:
DISABLE
,
or
DIRECT
then validate by
pressing the
OK
key.
Summary of Contents for MF 3725
