Sagem MF 3725, User Manual

Page: 66 / 152

3-12
Setting your machine
Date en cours : 9 février 2005
C:\Documents and Settings\G097447\Bureau\MFK V2 LU 251 816 433A MF 3725 GB\Configuration Gb.fm
M
ESSAGE SERVICE AND THE
I
NTERNET
Your terminal lets you send and receive documents and E-mails from subscribers throughout the world
over the Internet.
An E-mail is an electronic message sent over the Internet, to an E-mail address (which is a personal
Internet mailbox).
Access to the Internet is possible thanks to the local network settings.
Before worldwide transmission, you must:
• check that all initialisation parameters correspond to those provided by the network adminis-
trator,
• perform the proper settings , if needed, for the Internet connection.
You may then connect yourself to the Internet to send and receive fax-Internet or E-mails. Both
operations will be performed during a connection.
I
NITIALISATION PARAMETERS
You must define or, at least check all parameters needed to identify yourself with the local network.
Your network administrator will provide you with these parameters.
The parameters are divided in 3 categories:
• message service , allows you to define the message service identifier, the message service pas-
sword and the E-Mail address,
• servers , allows you to identify the name of the OP address of Internet SMTP providers (send) and
POP3 (MBX reception) and the address of DNS 1 and DNS 2 servers. The server address is made
up of 4 groups of 3 digits maximum, separated by dots.
• SMTP Authentification , used to activate the authentification protocol when the SMTP server
used requests this to end e-mails.
Access to connection and message service parameters
91 OK - INTERNET / SUPPLIER
Select
LOCAL NETWORK
to show the connection parameters and validate by pressing the
OK key.
Choosing
NO ACCESS
disables access to Internet functions OK .
921 OK - INTERNET / INIT. ETHERNET / MESS. SERV
Enter Email
IDENTIFIER
, press
OK
.
Enter Email
PASSWORD
, press OK .
Enter
E-MAIL ADR
, press OK .