Sagem MF 3725, User Manual

Page: 110 / 152

6-10
Contents
Date en cours : 9 février 2005
C:\Documents and Settings\G097447\Bureau\MFK V2 LU 251 816 433A MF 3725 GB\Fonction impression Gb.fm
Switching the "Duplex path" on and off
Note: The front/back module must be installed on the printer to use this function.
If the paper type is specific and the front/back module is installed, you can choose whether or not to
allow printing via the front/back module as shown in the following procedure.
MENU - - PAPER HANDLING - > - - TYPE ADJUST > DUPLEX PATH
Press E
NTER
, a blinking "?" appears.
Press the and keys to choose the desired type. The following types are available:
Press E
NTER
.
Reinitialising the custom paper type
MENU - - PAPER HANDLING - > - - RESET TYPE
Press E
NTER
, a blinking "?" appears.
Press E
NTER
.
All custom settings (paper weight and duplex path) are reinitialised to their default values.
Multi tray mode
The multipurpose tray can be used in two modes – Priority or cassette. The multipurpose tray loads the
paper differently depending on which mode has been chosen:
• Cassette mode
Default mode. The multipurpose tray acts like all the other paper sources. The printer can load
paper from any other source controlled from the printer driver. Cassette mode allows quicker
printing than Priority mode.
• Priority mode
The paper placed in the multipurpose tray is automatically loaded and replaces any other paper
source selected from the printer driver. Once all the sheets of paper in the multipurpose tray have
been used, (approximately 100 sheets [size A4, 0.11 mm in thickness], the printer is again fed
from the previously selected paper source. This mode allows you to load paper of an individual
size or type without needing to reload the current paper source. To feed the printer from the cho-
sen paper source, empty the multipurpose tray.
Note: The manual feeder's maximum capacity is 100 sheets with A4 paper. If you are using Legal paper, the number of
pages must be below 100 in order to avoid paper jams.
To switch the multipurpose tray to priority mode, follow the procedure below:
MENU - - PAPER HANDLING - > - - MP TRAY MODE
Press E
NTER
, a blinking "?" appears.
Select C
ASSETTE
or P
RIORITY
using the or keys. Press E
NTER
.
Selecting the source tray
This menu allows you to select the source tray to be used for a print job. If no options are installed, only
tray 1 and the M
ULTI
tray are available. If additional trays are installed, they will appear on the list.
MENU - - PAPER HANDLING - > - - FEED SELECT
Press E
NTER
, a blinking "?" appears.