Sagem MF 3725, User Manual

Page: 132 / 152

7-10
Maintenance
Date en cours : 9 février 2005
C:\Documents and Settings\G097447\Bureau\MFK V2 LU 251 816 433A MF 3725 GB\MaintenanceGb.fm
C
LEANING
Cleaning the scanner’s reading devices
When one or more vertical lines appear on transmitted copies or faxes, follow these steps:
Cleaning the printer
Dust, dirt and paper debris on the outer surfaces and inside the printer can interfere with printer
performance. Clean the printer regularly.
Remark : If the message "Clean Printer Press GO" appears after replacing the toner cartridge. Carry out the printer cleaning
procedures (corona, grille, etc.) described in the paragraph on
Replacing cartridges , page 7-2 then press the GO
button. The message will disappear and the printer will be ready to print.
Caution -
Use a soft cloth to clean the printer. Never use abrasive or corrosive detergents.
The fusing unit can become very hot during operation. To avoid injury - do not touch.
Wait for at least 10 minutes after the printer has been turned off and make sure that the fusing unit has
cooled before cleaning the interior of the printer.
Open the scanner cover by
pushing it backwards until held
vertically in position.
Clean the two transparent
scanning windows with a soft,
lint-free cloth, dampened with
alcohol.
Close the scanner cover.
Make a copy to check that the
symptoms have been cleared.