Sagem MF 3725, User Manual

Page: 62 / 152

3-8
Setting your machine
Date en cours : 9 février 2005
C:\Documents and Settings\G097447\Bureau\MFK V2 LU 251 816 433A MF 3725 GB\Configuration Gb.fm
Case of connection to a domain (for instance with Windows NT,
2000 or XP)
The terminal can identify itself on the local network by using the parameters of a user account, before
it can, among others, archive documents by means of the Scan to Disk function.
Once these parameters have been filled in, they will be used by default, if you do not declare a user
name and password when using the function.
Login user name
2541 OK - SETUP / NETWORKS / DOM LOGIN / USER
Enter the user name for login on the local network, then validate with OK .
Login password
2542 OK - SETUP / NETWORKS / DOM LOGIN / PASSWORD
Enter the password for login on the local network, then validate with
OK
.
Nom de domaine
2543 OK - SETUP / NETWORKS / DOM LOGIN / DOM. NAME
Enter the domain name of the local network, then validate with OK .
P
RINT FUNCTION SETTINGS
The printer can be connected to the local network as it has its own IP address.
Updating network settings
The print console allows you to:
• turn TCP/IP, NetWare and EtherTalk on or off
• turn DHCP on or off
• enter the IP address, the subnet mask address and the default gateway address.
To check or change the network card settings:
Press the M
ENU
key.
Repeatedly press the or keys until I
NTERFACE
appears.
One of the interface names below appears, showing that it is the current interface.
Press E
NTER
, a blinking "?" appears.
• P
ARALLEL
(default setting)
• USB
• Optional (when the network card is installed)