Safeline Signature, Operating And Instruction Manual

Page: 42 / 168

OPERATING INSTRUCTIONS
26 4618 - 021
Speed change guide
Introduction
This guide details in a step-by-step manner all settings that may have to be changed if the speed of
operation of the detector is changed.
NOTE
All of the following items may be set from the
Engineer Mode of operation
1)
‘Product speed’
on page 45.
2)
‘Vibration Setup’
on page 44
3)
‘Reject Timers’
and subsequent timer
sections on pages 42 and 78.
4)
‘Reject Confirmation’
on page 46.
5)
‘Product Number Settings Guide’
on
page 23.
Set up the speed of the product - either manually or
automatically.
Set up the detector to the vibration characteristics of
your system.
Set up the required timer groups to the appropriate
timer type and settings. Note this step is NOT
required for timers which are synchronised to the
product speed (e.g. tm3 and tm3G timer types).
If you are using the reject checking facilities of the
detector.
See the earlier guide.
How to... ‘Measure the speed of the product’
Step 1)
Enter the Engineer security code.
‘Entering security codes’
on page 19.
Step 2)
Select the Speed Setup Menu.
‘Speed Setup Menu’
on page 45
Step 3)
Select the ‘Auto Adjust’ feature and follow the
‘Product Speed’
on page 63.
instructions on the display.
Step 4)
On completion of step 3) the Product Speed
‘Product Speed’
on page 63.
display will show the current speed of the
product.
Step 5)
Press the PROG/EXIT key.