Safeline Signature, Operating And Instruction Manual

Page: 148 / 168

APPENDIX D
4618-021
132
Command Identifier - ‘Q’ QA Lists and Displays
All QA relevant displays (see ‘QA Operator Mode’ and ‘QA Inspector Mode’ flowcharts in the manual) will be
represented as a separate subseries from the main protocol letters. The elements of the subseries would be
identified by a number corresponding to the numbered position in the flowcharts mentioned. Thus the subseries
would be identified primarily by its letter ‘Q’ and then by its position within the ‘Q’ subseries by a number.
In the following table both the leading letter and the subseries element number are shown:
QA Operator commands
Command
1,2
Direction
3
Description Type
4
‘Q01,’ m ‘,’ n
‘,’ o
‘Q01?’
in/out
in
Test Sample Material
m = product number
n = Sample
n = 0 : Ferrous
n = 1 : None - Ferrous
n = 2 : Stainless Steel
o = Test Result
o = 0 : Failed
o = 1 : Passed
Request last values of m, n, and o used by the detector.
P
‘Q02’ ....
’Q09’ ----------- Reserved for later use
X
QA Inspector commands
Command
1,2
Direction
3
Description Type
4
‘Q10,’ n in/out Printing
n = 0 : Print(ing) all settings
n = 1 : Print(ing) shift reports
X
‘Q11,’ n
‘Q11?’
in/out
in
Line identification number
n = 4 digits number
Line Identification Number ?
X
‘Q12,’ n
‘Q12?’
in/out
in
Printer Selected
n = 0 : NO
n = 1 : YES
Printer selected ?
X
‘Q13,’ m ‘,’ n
‘,’ o
‘Q13?’ m ‘,’ n
in/out
in
Sample Size Registration
m = Product number, a two digit number in the range [0..20].
n = 0 : Ferrous Sample
n = 1 : None - Ferrous Sample
n = 2 : Stainless Steel Sample
o = Sample size in mm, a two digit number in the form X.X
(E.g. 09 = 0.9 mm
Sample Size Registration ?
P
‘Q14,’ n
‘Q14?’
in/out
in
Shift Report options
n = 0 : Reject Relay Operations OUT Modified Settings
OUT
n = 1 : Reject Relay Operations OUT Modified Settings IN
n = 2 : Reject Relay Operations IN Modified Settings
OUT
n = 3 : Reject Relay Operations IN Modified Settings IN
Shift Report options ?
X