Installing the Air Filters of the Switch Fabric Module
(1) RG-S8610E
To install the air filter, follow these steps:
1)
Seat the air filter in the plastic cover and tighten screws.
2)
Install the plastic cover before the air filter by pressing firmly the two buttons on the both sides of the plastic cover.
Figure 3-6 Installing the Air Filter of the Switch Fabric Module on RG-S8610E Switch
Note:
Air filter
Installing Brackets
Wear the antistatic wrist strap and make sure the antistatic wrist strap is grounded well.
The brackets of RG-S8605E, RG-S8607E and RG-S8610E are installed before delivery, as shown in figure
3-7, 3-8 and 3-9). If you want to adjust the location of the bracket, see figure 3-10, 3-11 and 3-12.
Install the bracket to the front chassis side
(1) RG-S8605E bracket (installed before delivery)
Figure 3-7 Installing Brackets to Front Chassis Side
Summary of Contents for RG-S8605E
